USB Thermal Camera-hjkir

USB Thermal Camera

Product Features

It has all-weather passive thermal imaging function, has strong smoke penetration performance, and can be used in a wide range of ambient temperature.

The high frame rate design enables the operator to observe fast-moving targets.

The full-frame temperature measurement infrared thermal imager movement is used to achieve full-frame temperature measurement. Through front-end processing, the highest temperature, lowest temperature, center temperature and average temperature can be superimposed on the thermal imaging video.

It can select multiple areas for local temperature measurement.

Configuration Table

Detector
Detector Type	Uncooled focal plane microbolometer
Number of pixels	384 × 288
Pixel spacing	17μm
Wavelength range	8～14μm
Thermal sensitivity ( NETD)	≤50mk@30℃
Frame rate	25Hz
Image processing and display
Imaging time	≤15S
Image Optimization	support
Non-uniformity correction	support
Image Noise Reduction	support
Digital detail enhancement	support
Electronic zoom	1.0～4.0 times infinite magnification
Polarity control	support
Color Palette	Multiple color palettes including white hot, black hot, iron red, rainbow, etc.
Analog video output	CVBS(PAL)
Grayscale range adjustment	Automatic/Manual
Contrast, brightness	Automatic/Manual
Image Mode	HDR wide dynamic mode
Temperature measurement analysis
Temperature measurement accuracy	±2℃ or ±2%
Temperature measurement range	Normal temperature: -20℃～200℃
Highest temperature point tracking	support
Minimum temperature point tracking	support
Global maximum temperature display	support
Global minimum temperature display	support
Center point temperature display	support
Average temperature display	support
Custom temperature measurement frame	support
Electrical Characteristics
Digital electrical interface	DF12(5.0)-50DP-0.5(86)
Analog electrical interface	BM06B-SRSS-TB
Input power voltage	5V～12VDC
Steady-state power consumption	<1.5W
Peak power consumption	<2.0W
Reverse polarity protection	have
Over-voltage and under-voltage protection	have
Communication interface	One UART@TTL(3.3V) ; One UART ( RS232 )
Digital Video Interface	8bit parallel data @ TTL (3.3V)
Environmental parameters
Operating temperature	-40℃～60℃
Storage temperature	-50℃～70℃
Temperature shock resistance	5℃/min (-40℃～60℃)
Vibration resistance	4.3g, 2 hours for each of x, y and z axes
Shock resistance	Acceleration 30g, half sine wave, pulse width 6ms, impact 3 times in the installation direction
humidity	≤95% ( non-condensing )
Lenses
Focus mode	electric
Auto Focus	support
Physical properties
Dimensions	76.0mm × 57.2mm × 75.0mm
weight	<310g
Mounting holes	Two M3×4 on each side