K12

K12

The K12 online infrared thermal imaging thermometer，thermal camera usb c uses a 12μm uncooled infrared focal plane detector, a high-performance infrared lens and a signal processing circuit, and is embedded with advanced image processing algorithms. It has the characteristics of small size, low power consumption, fast startup, excellent imaging quality, and accurate temperature measurement.
usb ir camera selection of the K12E2 usb thermal imaging camera fully considers the requirements of high and low temperature working performance to ensure that the whole machine has excellent environmental adaptability.

Product Features

It has all-weather passive thermal imaging function, strong smoke penetration performance, and can be used in a wide range of ambient temperature;

Integrated debugging, small size, easy to integrate;

Adopt self-developed temperature measurement and correction algorithm to achieve accurate temperature measurement;

Output full-stream lossless 16-bit temperature data, provide client software and SDK development kit, convenient for customers to carry out secondary development and system integration, and fully carry out personalized temperature analysis of the measured target.

Configuration Table

Detector
Detector Type	Uncooled focal plane microbolometer
Number of pixels	256 × 192
Pixel spacing	1 2 μm
Wavelength range	8～14μm
Thermal sensitivity (NETD)	≤50mk@ 25 ℃
Frame rate	25 Hz
Image processing and display
Imaging time	≤1 5 S
Color Palette	Multiple color palettes including white hot, black hot, iron red, rainbow, etc.
Contrast, brightness	Automatic/Manual
Data Format	16-bit temperature data ( full bit stream )
Temperature measurement analysis
Temperature measurement accuracy	±2℃ or ±2%
Temperature measurement range	Normal temperature: -15 ℃ ～ 150 ℃ Medium temperature: 50 ℃～ 550 ℃
Electrical Characteristics
Web Standards	100M/1000M
Protocol support	UDP
Input power voltage	5V ～12VDC
Communication interface	UART@ RS 485 (reverse control of PTZ and camera)
Data Interface	M12 aviation plug (including power, network and RS 485 interface)
Steady-state power consumption	< 2 W
Reverse polarity protection	have
Over-voltage and under-voltage protection	have
Environmental parameters
Operating temperature	-40 ℃～60 ℃ ( -10 ℃ ～60 ℃ to ensure temperature measurement accuracy)
Storage temperature	- 5 0℃～70℃
Temperature shock resistance	5℃/min (-40℃～60℃)
Vibration resistance	4.3g, 2 hours for each of x, y and z axes
Shock resistance	Acceleration 30g, half sine wave, pulse width 6ms, impact 3 times in the installation direction
humidity	≤95%(non-condensing)
Lenses
focal length	optional
Focus mode	Manual
Field of view	optional
Spatial resolution	optional
Physical properties
Dimensions	66 mm × 66 mm × 60.5 mm
Waterproof grade	IP67
weight	< 310 g
Mounting holes	Two M3 × 4 on each side of the bottom
Client
Real-time temperature display	support
Various temperature measurement objects	support
Alarm Analysis	support
Record/Photograph/Playback	support
SDK development package
Operating Environment	Support win32, x64 , Linux ( x86 /ARM )
Data Acquisition	16-bit temperature data (full stream) through callback function