G46E35

G46E35

The G46E35 serie thermal camera module is equipped with a high-performance short-wave infrared detector , a high-performance infrared lens, an excellent imaging processing circuit, and is embedded with advanced image processing algorithms . Thermal security cameras has low noise, small size , low power consumption, fast startup, excellent imaging quality, low spectral response wavelength, accurate temperature measurement , wide temperature measurement range, and is suitable for ultra-high temperature temperature measurement sites.
G46E35 series cam thermal fully considers the requirements of high and low temperature working performance to ensure that the whole machine has excellent environmental adaptability .

Product Features

It has all-weather passive thermal imaging function, strong smoke and glass penetration performance, and can be used in a wide range of ambient temperature;

Adopt self-developed temperature measurement and correction algorithm to achieve accurate temperature measurement , suitable for ultra-high temperature measurement scenarios;

Output full-stream lossless 16-bit temperature data;

It provide client software and SDK development kit , facilitate customers to carry out secondary development and system integration, and fully carry out personalized temperature analysis of the measured target.

Configuration Table

sensor
Number of pixels	640×480
Pixel size	7um
Spectral response wavelength	0.8~2um
Thermal sensitivity	< 1K
Maximum frame rate	125Hz (configurable)
Image processing and display
Image Optimization	support
Image Noise Reduction	support
Color Palette	Multiple color palettes including white hot, black hot, iron red, rainbow, etc.
Data Format	16-bit temperature data ( full bit stream )
Temperature measurement analysis
Temperature measurement accuracy	± 1 %
Temperature measurement range	600 ℃～ 2500 ℃ (customizable)
Highest temperature point tracking	support
Minimum temperature point tracking	support
Global maximum temperature display	support
Global minimum temperature display	support
Center point temperature display	support
Custom temperature measurement frame	support
Electrical Characteristics
Data Interface	RJ45
Web Standards	Gigabit Ethernet
Protocol support	GigE Vision V2.0 protocol and GenICam standard
Power interface	2EDGKD-3.81mm/2P
Input power voltage	9-24 VDC
Steady-state power consumption	< 2.5 W
Reverse polarity protection	have
Over-voltage and under-voltage protection	have
Environmental parameters
Operating temperature	-20 ℃ ～ 60 ℃
Storage temperature	- 40 ℃～70℃
Temperature shock resistance	5℃/min ( -40℃～60℃ )
Vibration resistance	4.3g, 2 hours for each of x, y and z axes
Shock resistance	Acceleration 30g, half sine wave, pulse width 6ms, impact 3 times in the installation direction
humidity	≤95%( non-condensing )
Lenses
focal length	Athermal 35 mm
Focus mode	Manual
Field of view	7 ° × 5 ° ( horizontal field of view × vertical field of view )
Spatial resolution	0.2 mrad
Physical properties
Dimensions	45 mm × 45 mm × 113.7 mm
weight	< 225 g
Mounting holes	M3×4 all around
Client
Real-time temperature display		support
Various temperature measurement objects		support
Alarm function		support
Record/Photograph/Playback		support
SDK development package
Operating Environment		Support win32, x64 , Linux ( x86 /ARM )
Data Acquisition		16-bit temperature data (full stream) through callback function