NX43

NX43

The NX43 series online infrared thermal imaging thermometer, thermal camera usb uses a 17μm uncooled infrared focal plane detector, a high-performance infrared lens, an excellent imaging processing circuit, and is embedded with advanced image processing algorithms. It has the characteristics of small size, low power consumption, fast startup, excellent imaging quality, and accurate temperature measurement.

NX43 series online infrared thermal imaging thermometer,ir camera usb fully considers the requirements of high and low temperature working performance to ensure that the whole machine has excellent environmental adaptability.

The NX43 series online infrared thermal imaging thermometer,ir usb camera outputs full-stream lossless temperature data and video stream data in H.264 compression format, and provides SDK to facilitate customer back-end integration development, fully analyzing the temperature of the target being measured.

Product Features

It has all-weather passive thermal imaging function, has strong smoke penetration performance, and can be used in a wide range of ambient temperature ;

Support ONVIF protocol and can be connected to mainstream NVR;

Adopt self-developed temperature measurement and correction algorithm to achieve accurate temperature measurement, with the temperature measurement accuracy up to ±2%;

Output full-stream lossless temperature data and H.264 compressed video stream data, provide client software and SDK development kit to facilitate customers to carry out secondary development and system integration, and fully carry out personalized temperature analysis of the measured target .

Configuration Table

Detector
Detector Type	Uncooled focal plane microbolometer
Number of pixels	384 × 288
Pixel spacing	12μm
Wavelength range	8～14μm
Thermal sensitivity ( NETD)	≤ 50mk @30℃
Frame rate	25Hz
Image processing and display
Image Optimization	support
Non-uniformity correction	support
Image Noise Reduction	support
Electronic zoom	1.0～4.0 times infinite magnification
Polarity control	support
Color Palette	Multiple color palettes, including white hot, black hot, iron red, rainbow, etc.
Contrast, brightness	Manual
Gamma Correction	support
Enhanced Algorithm	support
Network video compression format	H.264
Grayscale range adjustment	Automatic
Image Mode	HDR wide dynamic mode
OSD	support
Temperature measurement analysis
Temperature measurement accuracy	±2℃ or ±2%
Temperature measurement range	Normal temperature: -20℃～200℃ Medium temperature range: 150 ℃～800℃ High temperature range: 350 ℃～1600℃ ( Can be extended to 2500℃ )
Temperature correction	Emissivity, reflected temperature, effective distance
Automatic tracking of hot and cold spots, Temperature display	support
Center point temperature display	support
Average temperature display	support
Temperature measurement tools	Point, line, rectangle, circle, ellipse, polygon
Alarm function	High temperature, low temperature, temperature range, range inversion, trend
Video	Support MP4, GCV
Photograph	Support JPEG
Temperature data export	Area csv, temperature curve csv
Electrical Characteristics
Data Interface	RJ45
Data Types	H264，16-bit original temperature data
Web Standards	Gigabit Ethernet /Adaptive 10M/100M/1000M
Protocol support	IPv4/IPv6, TCP , UDP, NTP, HTTP, RTSP, RTP, ICMP, WebSocket, ONVIF
Power interface	4 PIN SH
Input power voltage	DC12V
Steady-state power consumption	< 4.0W
Reverse polarity protection	have
Over-voltage and under-voltage protection	have
Communication standards	UART@RS485 ( reverse control of PTZ and camera , Modbus-RTU protocol )
IO Input and Output	support
Focus mode	Manual
Environmental parameters
Operating temperature	-40℃～ + 60℃ ( -20℃~+60℃ to ensure temperature measurement accuracy )
Storage temperature	-50℃～ + 70℃
Temperature shock resistance	5℃/min ( -40℃～ + 60℃ )
Vibration resistance	4.3g, 2 hours for each of x, y and z axes
Shock resistance	Acceleration 30g, half sine wave, pulse width 6ms, impact 3 times in the installation direction
humidity	≤95% (non-condensing)
Lenses
focal length	Various focal length lenses are available
Focus mode	Manual
Physical properties
size	NX43: 45mm×45mm×60.1mm	NX46： 45mm×45mm×64.1mm
weight	< 90 g
Mounting holes	Two M3× 5 on the bottom
Client
Real-time temperature display	support
Various temperature measurement objects	support
Alarm function	support
Record/Photograph/Playback	support
SDK development package
Operating Environment	Support Windows (32Bit/64Bit) , Linux (32Bit/64Bit), MacOS, Android and most ARM systems
Secondary Development	Provide API, SDK and Demo. Support development in multiple languages such as C/C++, C#, Java, Javascript, Typescript, Python, Swift, etc.