K26H2E

K26H2E

K26H2E thermal imaging device, online infrared thermal imaging thermometer adopts a 17μm uncooled infrared focal plane detector, a high-performance infrared lens and a signal processing circuit, and is embedded with advanced image processing algorithms. Thermal camera module has the characteristics of small size, low power consumption, fast startup, excellent imaging quality, and accurate temperature measurement.

K26H2E cam thermal, online infrared thermal imaging thermometer fully considers the requirements of high and low temperature working performance to ensure that the whole machine has excellent environmental adaptability.

Product Features

It has all-weather passive thermal imaging function, strong smoke and glass penetration performance, and can be used in a wide range of ambient temperature;

High frame rate design allows observation of fast-moving targets;

Adopt self-developed temperature measurement and correction algorithm to achieve accurate temperature measurement;

Output full-stream lossless 16-bit temperature data, provide client software and SDK development kit , facilitate customers to carry out secondary development and system integration, and fully carry out personalized temperature analysis of the measured target.

Configuration Table

Detector
Detector Type	Uncooled focal plane microbolometer
Number of pixels	384 × 288
Pixel spacing	17μm
Wavelength range	8～14μm
Thermal sensitivity (NETD)	≤50mk@30℃
Frame rate	≤50Hz (configurable)
Image processing and display
Color Palette	Multiple color palettes including white hot, black hot, iron red, rainbow, etc.
Contrast, brightness	Automatic/Manual
Data Format	16-bit temperature data ( full bit stream )
Temperature measurement analysis
Temperature measurement accuracy	±2℃ or ±2%
Temperature measurement range	Normal temperature range: -20℃～200℃ ( standard ) Medium temperature range: 150 ℃～800℃ ( optional ) High temperature range: 35 0℃～1600℃ ( optional ) Ultra-high temperature range: 650℃~2000℃ (optional)
Electrical Characteristics
Data Interface	RJ45
Web Standards	100M/1000M (100M network needs to reduce frame rate)
Protocol support	UDP
Power interface	2EDGKD-3.81mm/2P
Input power voltage	DC12V
Communication interface	UART@ RS 485 (reverse control of PTZ and camera , Modbus-RTU protocol )
Steady-state power consumption	< 3 W
Reverse polarity protection	have
Over-voltage and under-voltage protection	have
Environmental parameters
Operating temperature	-40 ℃～ + 60 ℃ ( -20 ℃～ + 60 ℃ to ensure temperature measurement accuracy )
Storage temperature	-50 ℃～ + 70 ℃
Temperature shock resistance	5℃/min (-40℃～ + 60℃)
Vibration resistance	4.3g, 2 hours for each of x, y and z axes
Shock resistance	Acceleration 30g, half sine wave, pulse width 6ms, impact 3 times in the installation direction
humidity	≤95%(non-condensing)
Lenses
focal length	Various focal length lenses are available
Focus mode	Manual
Physical properties
weight	< 85 g
Mounting holes	Two M3×4 on each side
Client
Real-time temperature display	support
Various temperature measurement objects	support
Alarm function	support
Record/Photograph/Playback	support
SDK development package
Operating Environment	Support win32, x64 , Linux ( x86 /ARM )
Data Acquisition	16-bit temperature data (full stream) through callback function