SEARCH

High Resolution Cam Thermal

Contact Us

Configuration Table

Detector
Detector Type Uncooled focal plane microbolometer
Number of pixels 384 × 288
Pixel spacing 17μm
Wavelength range 8~14μm
Thermal sensitivity ( NETD) ≤50mk@30℃
Frame rate 25Hz
Image processing and display
Imaging time ≤15S
Image Optimization support
Non-uniformity correction support
Image Noise Reduction support
Digital detail enhancement support
Electronic zoom 1.0~4.0 times infinite magnification
Polarity control support
Color Palette Multiple color palettes including white hot, black hot, iron red, rainbow, etc.
Analog video output CVBS(PAL)
Grayscale range adjustment Automatic/Manual
Contrast, brightness Automatic/Manual
Image Mode HDR wide dynamic mode
Temperature measurement analysis
Temperature measurement accuracy ±2℃ or ±2%
Temperature measurement range Normal temperature: -20℃~200℃
Highest temperature point tracking support
Minimum temperature point tracking support
Global maximum temperature display support
Global minimum temperature display support
Center point temperature display support
Average temperature display support
Custom temperature measurement frame support
Electrical Characteristics
Digital electrical interface DF12(5.0)-50DP-0.5(86)
Analog electrical interface BM06B-SRSS-TB
Input power voltage 5V~12VDC
Steady-state power consumption <1.5W
Peak power consumption <2.0W
Reverse polarity protection have
Over-voltage and under-voltage protection have
Communication interface One UART@TTL(3.3V) ; One UART ( RS232 )
Digital Video Interface 8bit parallel data @ TTL (3.3V)
Environmental parameters
Operating temperature -40℃~60℃
Storage temperature -50℃~70℃
Temperature shock resistance 5℃/min (-40℃~60℃)
Vibration resistance 4.3g, 2 hours for each of x, y and z axes
Shock resistance Acceleration 30g, half sine wave, pulse width 6ms, impact 3 times in the installation direction
humidity ≤95% ( non-condensing )
Lenses
Focus mode electric
Auto Focus support
Physical properties
Dimensions 76.0mm × 57.2mm × 75.0mm
weight <310g
Mounting holes Two M3×4 on each side

 

Learn more about lens sizes