MSFL36KN Online single spectrum infrared thermal imaging temperature measurement system (water-air cooling) manufacture of infrared thermal imager

MSFL36KN Water-Air Cooling

MSFL36KN online single spectrum infrared thermal imaging temperature measurement system (water-air cooling) is an integrated online temperature measurement monitoring device, consisting of a tripod or pan/tilt, and a 17um uncooled infrared thermal imager. Embedded with advanced image processing algorithms, it has the characteristics of low power consumption, fast startup, excellent imaging quality, and accurate temperature measurement. The device selection of MSFL36KN online single spectrum infrared thermal imaging temperature measurement system fully considers the requirements of high and low temperature working performance. Water-air cooling uses air and water to circulate heat at the same time to ensure that the whole machine has excellent environmental adaptability.

PRODUCT FEATURES

It has all-weather passive thermal imaging function, has strong smoke penetration performance, and can be used in a wide range of ambient temperatures;

It adopts high frame rate design to observe fast-moving targets;

It adopts self-developed temperature measurement and correction algorithm to achieve accurate temperature measurement;

Infrared data transmission can be completed with a single network cable, and monitoring and temperature measurement are carried out simultaneously；

It is widely used in steel, petrochemical online monitoring and other fields；

It has the characteristics of low power consumption, fast startup, excellent imaging quality, and accurate temperature measurement.

Specifications

Focal length	8、9.6、13、19、25、35mm(f#1.0)
Number of pixels	384×288/640×480
Camera model	K series/n series
Imaging range	0.3m～∞
Pixel spacing	17μm
Wavelength range	8～14μm
Thermal sensitivity (netd)	≤50mk@30℃
Frame rate	≤50hz（configurable）
Imaging time	≤15s
Palette	Multiple color palettes, including white hot, black hot, iron red, rainbow, etc.
Data format	16-bit temperature data (full code stream)
Temperature measurement range	Normal temperature range: -20℃～200℃ Medium temperature range: 50℃～800℃ High temperature range: 50℃～1600℃
Temperature measurement accuracy	±2℃ or ±2%
Data interface	Rj45
Network standard	100m/1000m (100m network needs to reduce frame rate)
Protocol support	Udp
Power interface	2edgkd-3.81mm/2p
Input power voltage	5v～12vdc
Communication interface	Uart@rs485（reverse control of gimbal and camera）
Steady-state power consumption	<2.2w
Reverse connection protection	Yes
Over-voltage and under-voltage protection	Yes
Operating temperature	0℃～60℃ (temperature measurement accuracy can be guaranteed within the range of 15℃～35℃)
Storage temperature	-45℃～70℃
Temperature shock resistance	5℃/min (-40℃～60℃)
Vibration resistance	4.3g, 2 hours per axis for x, y, and z
Shock resistance	30g acceleration, half sine wave, pulse width 6ms, 3 impacts in the installation and use direction
Humidity	≤95% (non-condensing)
Focal length	8、9.6、13、19、25、35mm(f#1.0)
Clear imaging range	0.3m～∞
Dimensions	Ø89mm×212mm
Weight	4kg
Mounting holes	4-ø9through hole
Working environment temperature	-25℃~+600℃ (air-cooled medium, can withstand 150℃ ambient temperature; water-cooled medium, can withstand 600℃ ambient temperature)
Cooling water temperature	≤35℃
Cooling water pressure	0.1~0.4mpa
Ip protection level	Meet ip66 standard
Compressed air temperature	≤35℃
Compressed air pressure	0.1mpa-0.8mpa
Air purge function	The front lens protection germanium sheet is equipped with a wind curtain, which supports air purge function to prevent dust from adhering to the lens surface
Real-time temperature display	Support
Multiple temperature measurement objects	Support
Manual temperature window stretching	Support
Photography and analysis	Support
Generate reports	Support
Common phrase dictionary entry	Support
Unit/user/member management	Support
Operating environment	Support win32, x64, linux (x86, arm)